'76 Vector Merc 1150 Ignition

Randy,
    It's Kali again. I fixed my carb problem with the needle and floats, sure enough when I got in there one float was full of gas. But now I have no ignition! I was wondering if you or any one you know has an original diagram of the ignition layout? Also where might be a good spot to find one?? Any help is very appreciated, I'd like to go out before the snow falls!

Thanks for every thing again!
           
                           Kali "still beached" MN 76 Vector

Kali: 

Too bad your motor is down again.  Sounds like you have a CDI box failure.  Possibly a stator failure.  Suggest getting ahold of Al at Supreme Marine in Minneapolis.  He has a large selection of used parts for your motor.  Hopefully he is close to where you are.   His number is:  612-588-3456.  He will probably have a schematic on the motor.  Hope this helps. 

Please submit whatever questions you have to IHRTechTalk@yahoo.com.  All questions and answers selected will be displayed on this page as they come in.  Note: though all boaters are welcome, priority may be given to I.H.R. members.  Randy can not be held responsible for any advice given.  Though his information and expertise is second to none, he has no control over what you do with your boat.  It is up to you to boat safely and act responsibly, and his advice is only to be used as a guidance for your high performance boat/motor of which you are the one responsible for the risks involved.

Thanks,
Mark C.

[ Home l About I.H.R. l History l Models l Registry l Members' Pictures l Feature Article l Tech Talk ]
[ Literature l Events l Top Guns l Guest Boat l Classifieds l Video Gallery l Racing Corner ]
[ Prop Slippage Program l Animated Videos l Screen Savers l HIN Decoder l Links l Contact Mark ]