| |
| |
 |
|
|
|
|
 |
Vantage XT Setup Randy, I have ended up with a 200 Promax on my Vantage XT and have 12 inch set back. I have a trophy 26 and a 27 SRX that I plan on trying and curious as to where to start out with the propshaft height with this setback? The gear ratio is 1 87 with a Sportmaster lower unit. Which prop do you think will do the best? Thanks Chuck Chuck, That
is about 4 -5 inches of setback more than I would call ideal. The boat
will have a squatting problem coming on and off plane, but start with the
prop shaft 1“ below at 0 degrees trim. The SRX will be the most fun, but
you will need to have the leading edge rolled to get it up on plane in any
fashion.
Please submit whatever questions you have to IHRTechTalk@yahoo.com. All questions and answers selected will be displayed on this page as they come in. Note: though all boaters are welcome, priority may be given to I.H.R. members. Randy can not be held responsible for any advice given. Though his information and expertise is second to none, he has no control over what you do with your boat. It is up to you to boat safely and act responsibly, and his advice is only to be used as a guidance for your high performance boat/motor of which you are the one responsible for the risks involved. Thanks,
|
|
[ Home
l About
I.H.R. l History
l Models
l Registry
l Members'
Pictures l Feature
Article l Tech
Talk ] |
|