| |
| |
 |
|
|
|
|
 |
Jackplate for Vista/Nissan Hi Randy,
I am considering putting a 6" manual jackplate on my Canadian Edition
Vista with a Nissan NS90A. I have never installed a jackplate before
and was wondering what is the correct procedure. At what height
should I install it, would you set it so that the 'normal' height of the
motor (what it is now) is in the middle of the height adjustment range?
Mark,
Start
with the height in the middle but most important is the steering and
general clearances. You will find some interesting compromises will have
to be made to ensure clearance when tilted fully and turned etc. Bolt it
on and check everything out, then go have some fun.
Please submit whatever questions you have to IHRTechTalk@yahoo.com. All questions and answers selected will be displayed on this page as they come in. Note: though all boaters are welcome, priority may be given to I.H.R. members. Randy can not be held responsible for any advice given. Though his information and expertise is second to none, he has no control over what you do with your boat. It is up to you to boat safely and act responsibly, and his advice is only to be used as a guidance for your high performance boat/motor of which you are the one responsible for the risks involved. Thanks,
|
|
[ Home
l About
I.H.R. l History
l Models
l Registry
l Members'
Pictures l Feature
Article l Tech
Talk ] |
|